You only have one life in RoboCop: Rogue City so you better make it count, especially in scenarios where making the wrong call may produce interesting results. Besides, it’s quite expensive to have a replacement for you at the ready, given Detroit’s economy and all.
So, how do you disarm the bomb under the bridge? Do you need to be an engineer to understand how red, green, and blue work? If not, then that’s fine, just do everyone a favor and read the guide below before you start seeing white.
How To Disarm The Bomb
You’ll find the bomb during the objective “The Revenge of the Street Vultures.” What you need to do is pay attention to the voltage attached to the wire.
Start with the highest and work your way down to the lowest voltage possible. For this mission, you’re essentially going from left to right.
Here’s a combination that you can keep an eye on if you’re still confused. We’ll start from the blue wires first:
- First wire – 30v
- Second wire – 24v
- Third wire – 21v
Here’s what you need to cut in the right order when dealing with the red wires:
- Fourth wire – 19v
- Fifth wire – 16v
- Sixth wire – 12v
Last but not east, here’s what needs to be cut for the green ones:
- Seventh wire – 9v
- Eighth wire – 6v
- Ninth and last wire – 3v
Once you get all of that in the right order, a message will display on the bomb that says “DISARMED.” If you get a different result, then you can always give the guide another read.
And that’s how you can disarm the bomb in RoboCop: Rogue City. Now try it out and see if you can get it done without blowing yourself up!
ALSO READ: RoboCop Rogue City: Where To Find The Access Card
